| |
|
| 10 Litre Galvanised Steel with Viton seals |
5 Litre Stainless Steel with Viton or Nitrile seals |
 |
 |
| Filler
Funnel with integrated storage compartment and filter |
Ergonomically designed
Pump Handle
|
The Gloria 400/500 series are a next generation design of
the traditional Gloria steel sprayers. These sprayers are
5 or 10 Litre capacity available in Stainless Steel &
Galvanised Steel, with Viton or Nitrile seals. The 400/500
range offers additional features whilst maintaining the high
performance and reliability characteristics of the traditional
models.
Externally, the redesigned filler funnel incorporates a compartment
to store spare tips, filters and “O” rings and
a filter to minimise the risk of contamination when recharging
the sprayer. The shoulder carry straps are a new design to
provide for extra comfort in use and the pump handle is a
comfortable ergonomic design.
Technical improvements include the Galvanised Steel tanks
being finished with a special long life inner coating, a combined
pressure release and high pressure safety valve and a redesigned
foot-valve on the pump assembly.
View Technical Details
| |
|
| 176T Galvanised
Steel 5 litres Working Capacity (8 litres total) |
172RT Galvanised steel
10 litres Working Capacity (13.7 litres total) |
WE HAVE BEEN
SELLING GLORIA SPRAYERS TO INDUSTRY SINCE 1978
| |
|
| 141T Stainless
steel 5 litres Working Capacity (8 litres total) |
142T Stainless steel
10 litres Working Capacity (13.7 litres total)
|
| ALSO
AVAILABLE AS SPECIAL MODELS |
‘Special’ versions are similar in appearance
to the ‘Standard’ models, but have Viton (R)
seals for increased chemical resistance.
| |
|
172RT Galvanised steel
10 litres Working Capacity (13.7 litres total) |
176T Galvanised
Steel 5 litres Working Capacity (8 litres total) |
DEDICATED ‘SPECIAL’ versions of GLORIA Heavy
Duty Sprayers are fitted with adaptions and nozzles proved
suitable for specific applications. These include BITUMEN
EMULSION, CONCRETE CURATIVES, MOULD OIL, CREOSOTE, WOOD
PRESERVATIVES, WATER BASED and SPIRIT BASED FABRIC PROTECTOR
FLUIDS etc.
| DEDICATED
HEAVY DUTY SPRAYERS |
| |
|
| A ‘Dedicated’
Pair
The normal brass spray lance is ideal for carpet protector
and the pistol gun with instant shut-off makes it
very convenient for upholstery.
|
The GPS injection
nozzle can enable the application of de-icer fluids
and preservatives into difficult situations.
|
Viton (R) is a registered trademark of DuPont Dow Elastomers
GENERAL FEATURES
CONTAINER
Welded stainless steel or welded mild steel. The latter is hot
dip galvanised after manufacture and painted. A pressure gauge,
safety valve and decompression valve are fitted in the top of
the container and protected by a plastic shroud, which also
acts as a filler funnel. The plastic base moulding provides
a ‘parking place’ for the spray lance.
CARRYING STRAPS 5 litre models are provided
with a single shoulder strap; 10 litre models are provided
with a back-pack type, twin strap harness. Both versions are
adjustable.
PUMP Strong brass construction, pump barrel
and plated steel piston rod assembly employing a very simple
and efficient ‘O’ ring principle. The complete
pump is unscrewed and removed for filling and can be used
to carry the sprayer when it is replaced.
DELIVERY HOSE Standard hose is 1.3 metres
of strong, but flexible reinforced, oil resistant rubber.
Alternative lengths and types of hose are always available
ex-stock.
TRIGGER VALVE Very robust, quick action
valve, with brass body and internal action. A removable strainer
is incorporated in the handle to minimise blockages. Spray
pressure control modules are available which fit between the
trigger valve and the spray lance. These can be supplied either
as an optional extra with new sprayers, or as an accessory
for existing sprayers.
SPRAY LANCE Brass. 0.5 metre working length.
Extensions are available from 0.5 to 2.0 metres.
SPRAY NOZZLE A brass, adjustable nozzle,
variable from pencil jet to a fine, hollow conespray pattern
is standard equipment. Many alternative nozzle types are available
ex-stock for specific applications.
STANDARD SEAL MATERIAL Nitrile rubber. ‘Special’
models are fitted with Viton (R), other materials are also
available.
MAXIMUM WORKING PRESSURE 6 bars (90psi)
|
