 |
MAIN
MENU |
GPS SPRAYERS LTD
Tel: UK 01844 215533 Fax: UK 01844 215577
|
|
SPRAYING
ACCSSORIES |
|
Lightweight Brass Extensions
0.5 metre
& 1.0 metre
|
|
Aluminium Extensions
0.7 metres
1.5 metres
|
|
Telescopic Brass Extensions
0.5 to 1.0 metres
1.0 to 2.0 metres
|
Flat Fanspray
Crack and Crevice |
These are just two from a very wide range
of alternative spray nozzles which can be fitted to GLORIA
sprayers. The system is based on our Universal Nozzle
Holder, which will accomodate any standard spray
tip and strainer.
|
|
|
A brass assembly with three nozzles at
50cm centres, to spray larger areas. It fits the standard
spray lance and covers 1.5 metres. 02-F80 nozzle tips
are supplied as standard, but can easily be interchanged. |
|
|
This fits the standard spray lance. It
keeps the spray within an area approx. 38cm x 8cm. When
applying herbicides, the shield allows you to spray closer
to non-target plants. It is a strong, moulded hood, complete
with brass spray nozzle. |
|
|
This Compressor Connector can be fitted
in place of the normal pump, to enable the sprayer to
be charged with a compressor. |
| |
The Spraycart two wheel trolley is to mobilise
GLORIA Heavy Duty sprayers.
|
|
|
Any of the wide range of alternative nozzles
can be fitted direct to the trigger valve. |
|
|
A constant spray pressure can be achieved
with the Regulator Valve |
| PISTOL
SPRAYGUN & PARKING HOOK |
|
|
Instant shut-off
The valve seat is just behind the spray nozzle, so spraying
ceases without run-on or drips, as soon as the trigger
is released.
Extremely robust
Stainless steel, brass and teflon wetted parts in a
very strong, impact resistant, nylon body.
User friendly
Accurate application is made easy, because the Pistol
Spraygun is very convenient to hold and operate.
Adaptable
The Pistol Spraygun can be fitted to most GLORIA models
and will accommodate a wide range of spray nozzle tips.
|
| |
The Pistol Gun Parking Hook
for GLORIA 141T & GLORIA 176T
5 Litre Heavy Duty Metal Sprayers
Simply installed to either model with one self tapping
screw.
|
| FIXED
SPRAY PRESSURE REGULATOR |
|
|
Simple, low cost units for optimum, controlled
spray output
Three versions - Yellow 1 bar (15psi), Blue 2 bar (30psi)
& Red 3 bar (45psi)
Accurate application
The correct amount of product is applied
Environmentally safer
Avoids excessive residual contamination
Reduces wastage
More efficient use of chemicals
Versatile
Can be used with any ‘standard’ spray tip |
Higher container pressure is reduced to spray regulator
pressure. Spraying ceases if container pressure falls
below regulated pressure.
|
|
|
|
